Clifton 1000 Series Round Boiling Baths – 3.24 Litre
1026E – Constant Boiling
£395.00
Sale price
£395.00
Regular price
Skip to product information
Clifton 1000 Series Round Boiling Baths – 3.24 Litre
£395.00
Sale price
£395.00
Regular price
Clifton Range® · 1000 Series
Clifton 1000 Series Round Boiling Baths
Compact stainless-steel round boiling baths with a sheathed immersion heater, constant water-level device and low-water-level safety protection.
3.24 L Capacity
Compact round boiling bath for routine laboratory heating applications.
1000 W Heating
Sheathed immersion heater for effective boiling.
Stainless Steel
Robust stainless-steel round bath construction.
Two Control Options
Choose constant boiling or energy-regulated boiling.
1000 Series Round Boiling Baths
The Clifton 1000 Series Round Boiling Baths are compact stainless-steel boiling baths designed for laboratory applications requiring boiling water for heating samples and laboratory vessels.
Both versions are fitted with a sheathed immersion heater and a constant water-level device. A resettable thermal cut-out provides protection under low-water-level conditions.
The baths are supplied with a set of rings which allow the aperture diameter to be varied to accommodate different sizes of vessel, including evaporating dishes, glassware and round-bottom flasks heated by steam.
Choose your preferred boiling control
The 1026E provides constant boiling with no control, while the 1026ER incorporates an energy regulator for adjustment from a gentle simmer to a vigorous boil.
The 1026E provides constant boiling with no control, while the 1026ER incorporates an energy regulator for adjustment from a gentle simmer to a vigorous boil.
Available Models
| Product Code | Chamber Capacity | Temperature Range | Temperature Control |
|---|---|---|---|
| 1026E | 3.24 Litres | Boiling at 100°C | Constant boiling – no control |
| 1026ER | 3.24 Litres | Simmer to boiling at 100°C | Energy regulator |
Key Features
- Compact stainless-steel round boiling bath design
- 3.24 litre chamber capacity
- 1000 W sheathed immersion heater
- Constant water-level device
- Resettable thermal cut-out for low-water-level conditions
- Heater indicator showing heating operation and safety cut-out operation
- Supplied with a set of rings to vary the aperture diameter
- Suitable for different vessel sizes
- Suitable for evaporating dishes, glassware and round-bottom flasks heated by steam
- Stainless-steel construction
- 230 V models, 50–60 Hz
- Available with constant boiling or energy-regulated control
Control Options
1026E – Constant Boiling
The 1026E provides constant boiling water for gentle heating of samples. It operates at 100°C boiling with no temperature control.
1026ER – Energy Regulated
The 1026ER features a built-in energy regulator which controls the amount of boiling from a gentle simmer to a vigorous boil.
Flexible Vessel Accommodation
A set of rings is supplied with the boiling bath to allow the aperture diameter to be varied. This enables the bath to accommodate different sizes of laboratory vessel.
The manufacturer specifically identifies applications involving evaporating dishes, glassware and round-bottom flasks heated by steam.
Supplied aperture rings
The interchangeable ring arrangement provides flexibility when working with vessels of different diameters.
The interchangeable ring arrangement provides flexibility when working with vessels of different diameters.
Safety & Protection
Low Water-Level Protection
Both models incorporate a resettable thermal cut-out for low-water-level conditions. This provides protection if the water level falls below the required operating condition.
Heater Indicator
The heater indicator shows ON when heating and indicates when the safety cut-out has fired.
Constant Water-Level Device
Both the 1026E and 1026ER are fitted with a constant water-level device, helping maintain the required water level during operation.
This makes the 1000 Series particularly suited to applications where continuous boiling water is required for laboratory heating.
Stainless-Steel Construction
The 1000 Series features a stainless-steel round bath incorporating the sheathed immersion heater and water-level system. The compact design provides a practical solution for routine laboratory boiling and sample heating applications.
Technical Specifications
| Specification | 1026E | 1026ER |
|---|---|---|
| Chamber Capacity | 3.24 L | 3.24 L |
| Temperature Range | Boiling at 100°C | Simmer to boiling at 100°C |
| Temperature Control | Constant boiling – no control | Built-in energy regulator |
| Heater Power | 1000 W | 1000 W |
| Heater Type | Sheathed immersion heater | |
| Heater Indicator | ON = heating; OFF indicates safety cut-out has fired | |
| Water-Level Device | Constant water-level device | |
| Safety Protection | Resettable thermal cut-out for low-water-level condition | |
| Heater Power Supply | 1000 W, 220–240 V | |
| Voltage | 230 V models, 50–60 Hz | |
| Construction | Stainless steel | |
| Aperture | Variable using supplied set of rings | |
| External Dimensions | 200 W × 130 D mm | |
Choose Your Model
1026E
Constant Boiling
Provides constant boiling water at 100°C with no temperature control. Suitable where continuous boiling is required for gentle heating of samples.
1026ER
Energy Regulated
Features a built-in energy regulator allowing the boiling intensity to be controlled from a gentle simmer to a vigorous boil.
Choose the right Clifton 1000 Series boiling bath
Available as the constant-boiling 1026E or energy-regulated 1026ER, both with a 3.24 litre capacity and 1000 W heating system.
Specifications are based on the supplied Clifton manufacturer documentation. Product specifications may be subject to manufacturer updates.